China DIN3352 F4/F5 resilient gate valve,DIN3352 F4/F5 resilient gate valve manufacturers

Address: Economic Development Zone, Suncun, Wuhu City, China
Postcode: 241206
Sales hot line: +86-553-7255785
Email:manager@jmvpf.com

Download

Home » Products » Valve series » Soft-sealing gate valve » DIN3352 F4/F5 resilient gate valve

DIN3352 F4/F5 resilient gate valve

Other Products

Product Features

Introduction:

Resilient seated gate valve has great advantages of flexible switches, reliable seal, complete seal without leakage, good elastic memory, long life service etc., and can be widely used in fluid pipeline including drainage, petrochemical, construction and energy systems etc.

Applications & features:

1. Low torque, quick switches

A guide sleeve made of high-intensity nylon is set up in the guideway of the valve plate, which can effectively reduce the friction between the valve body guide rail and the valve plate, decrease the abrasion of the sediment to the rubber gate, lower the switch torque and extend the life service of the gate. The driving part of the valve rod adopts double thread, which makes the switch speed of the valve twice of that of the common valve.

2. Integrated valve deck

Adopt the combination of the integrated valve deck with the locknut (bronze) to form the combined sealing of the O-ring and bronze, PTFE gasket and screw thread. Compared with the like products, it has not leakage points at the flange, and has the compact structure with free maintenance; since the products were put into the market, there has not been maintenance case. In comparison with the sealing by the touching of traditional O ring and cast iron, the life service and sealing effect of the products in O ring has gained enhancement.

3. High cohesion intensity between the gate rubber and the cast iron framework.

The inner and outer surfaces of the cast iron framework are all covered with rubber, the thickness of the rubber is above the national standard, which adopts advanced glue molding technology, and the molded gate surface is smooth and clean without defects; the rubber thickness is well-distributed with high cohesion intensity, good elasticity and long life service.

4. Precision casting valves with high bearing and hard to break.

The valve body, deck and plate framework are all made of cast iron, adopt precision casting with precoated sand, good sealant of the casting, uniformity wall thickness, without air hole, crack and other defects, can withstand higher pressure and hard to break. The brass nut adopts die-cast formation technique, which has good physical performance and can withstand higher torque.

5. Food-grade sanitary requirement

The inner and outer surfaces of the valves adopt imported toxic electrostatic epoxy powder, the inner and outer surfaces of the valve plate are all covered with rubber, which will not cause rust or corrosion, and can be directly used for potable water supply system.

Materials：

No.	Name	Material
1	Valve body	QT450-10
2	Valve plate	QT450-10+EPDM
3	Guide sleeve	Nylon 66
4	Valve plate nut	ZCuZn38Mn2Pb2
5	Valve rod	2Cr13
6	Flanged seal ring	NBR
7	Inside hexagonal bolt	35#(surface zinc-plating)
8	Valve deck	PT450-10
9	O-ring	NBR
10	Snap ring	ZCuZn38Mn2Pb2
11	Copper cap	ZCuZn38Mn2Pb2
12	PTFE gaskets	F4

Main performance list:

Nominal pressure		1.0MPa	1.6MPa
Test Pressure	Seal	1.1MPa	1.76MPa
	Shell	1.5MPa	2.4MPa
Suitable temperature		-10°C～80°C
Suitable medium		Water, hot water, oil products
Design manufacturing standard		GB/T12232-1989
Test & inspection standard		GB/T13927-1992
Driving Method		Hand wheel, bevel gear, electric

Main parts’ list

Name	Material
Valve body	Ductile cast iron
Valve deck	Ductile cast iron
Valve rod seal ring	NBR or EPDM rubber
Valve plate	Ductile cast iron EPDM or NBR
Valve rod	Stainless steel
Screw twisting nut	Copper alloy

Main structural materials:

No	Parts’ name	Quantity	Material
1	Valve body	1	QT500-7
2	Valve plate	1	QT500-7/EPDM
3	Valve rod nut	1	ZCuZn38Mn2pb2
4	Valve rod	1	2Cr13
5	Sealing gasket	1	EPDM
6	Valve deck	1	QT500-7
7	Locating sleeve	1	Hpb59-1
8	O seal ringⅡ	1	EPDM
9	O seal ringⅠ	3	EPDM
10	Seal nut	1	ZCuZn38
11	Dust seal	1	EPDM
12	Hand wheel	1	Q235
13	Flat gasket	1	2Cr13
14	Outer hexagon bolt	1	2Cr13
15	Inside hexagonal bolt	8	35CrMoA

Main structural sizes:

F-V003-0050	DN	EN 1902-2 PN10				F-V003-6050	DN	EN 1902-2 PN16				DIN3352-F 4
F-V003-0050	DN	ФD	ФC	ФB	n-Фd	F-V003-6050	DN	ФD	ФC	ФB	n-Фd	L	H
F-V003-0050	50	165	125	99	4-Ф19	F-V003-6050	50	165	125	99	4-Ф19	150	270
F-V003-0065	65	185	145	118	4-Ф19	F-V002-6065	65	185	145	118	4-Ф19	190	290
F-V003-0080	80	200	160	132	8-Ф19	F-V002-6080	80	200	160	132	8-Ф19	180	320
F-V003-0100	100	220	180	156	8-Ф19	F-V002-6100	100	220	180	156	8-Ф19	190	350
F-V003-0125	125	250	210	184	8-Ф19	F-V002-6125	125	250	210	184	8-Ф19	200	450
F-V003-0150	150	285	240	211	8-Ф23	F-V002-6150	150	285	240	211	8-Ф23	210	470
F-V003-0200	200	340	295	266	8-Ф23	F-V002-6200	200	340	295	266	12-Ф23	230	560
F-V003-0250	250	400	350	319	12-Ф23	F-V002-6250	250	400	355	319	12-Ф28	250	640
F-V003-0300	300	455	400	370	12-Ф23	F-V002-6300	300	455	410	370	12-Ф28	270	740
F-V003-0350	350	505	460	429	16-Ф23	F-V002-6350	350	520	470	429	16-Ф28	290	760
F-V003-0400	400	565	515	480	16-Ф28	F-V002-6400	400	580	525	480	16-Ф31	310	850
F-V003-0500	500	670	620	582	20-Ф28	F-V002-6500	500	715	650	609	20-Ф34	350	950
F-V003-0600	600	780	725	682	20-Ф31	F-V002-6600	600	840	770	720	20-Ф37	390	1180

Quick Message

* Email
* Content
* Captcha

Other Products

DIN3352 F4/F5 resilient gate valve - Metal pipe fittings exporters, China fluid engineering products, Adaptor series manufacturers, Valve series wholesalers